I Installed Catalina macOS 10.15 however I'm unable to install the new Xcode 11.1 update. The download is successful and launchpad reports 'Installing' and then after some time I receve the message 'Unable to Download App. 'Xcode'could not be installed.

Quick Links

Have you tried to use Telnet on MacOS only to find out it wasn’t there?You’re not alone, many have been disappointed to find out that Telnet hasbeen removed from modern versions of the system software starting fromMacOS Mojave and newer. These instructions will work for MacOS Mojave andnewer, I happen to be running Big Sur and this is what I did to get Telnetback.

To develop Flutter apps for iOS, you need a Mac with Xcode installed. Install the latest stable version of Xcode (using web download or the Mac App Store). Configure the Xcode command-line tools to use the newly-installed version of Xcode by running the following from the command line. Open the Applications folder and open the new version of Xcode. If you renamed Xcode, make sure you open the correct application. Xcode may prompt you to install additional components. This will take a few minutes. While it's installing, check that your default Xcode version is the one you just downloaded: Open Terminal; Type brew config.

Installing Telnet on MacOS with Homebrew

First I would like to mention that there is an easier route, that is usingHomebrew. I see a lot about it and many people seem happy with it but I havean aversion to putting it on my machine. If you don’t already have Homebrewon your machine, navigate over to the brew website and followthe installation instructions. I would caution against following themexactly though for security purposes. I would do it like this instead:

Open and inspect the install.sh script to see what it does and make sure you feelcomfortable running it on your machine. And then run it.

After installing Homebrew, install Telnet

Installing Telnet on MacOS by Building Telnet from Source

This was the method I used. There are some prerequisite steps though, if youdon’t already have them you’ll need to install the MacOS command line tools.

Step 1: Installing the command line tools

Open a terminal and enter the following line, you’ll then be shown a pop upprompt.

Click install when the prompt pops up.

Install Xcode Mac Catalina Download

After that you’ll be shown a license which you’ll have to agree to in orderto install.

After that you’ll see the download progress and the install will happenafter that. Unfortunately I forgot to get screen shots of the followingmessage boxes.

Step 2: Getting the Telnet source

For this step you’ll be getting the GNU network utilitiesnavigate to the download pageand find the latest source. At the time I’m writing this it’s 1.9.4:

Step 3: Extract the source

Step 4: Configure and build

Now that the source is extracted change into the directory:

Run the configure command:

Run the make command to build:

And then install:

Either way you choose is fairly easy, the build for this is pretty straightforward and was very quick. I don’t think it even took me 10 minutes tobuild and install.

Xcode is the tool developers use to build apps for the Apple ecosystem – MacOS, iOS, and all things Apple.

Can't Install Xcode On Catalina

This guide will walk you through how to successfully install Xcode onto your Mac, from start to finish.

Here are some handy tips to know before you get started:

• Xcode only runs on a mac. If you are on a PC, sadly you won't be able to use Xcode.
• You'll need a good, stable internet connection. The latest version is around 8 gigabytes in size.
• Be sure to have at least 30 gigabytes of free space on your computer. The latest .xip file (v11.4.1 at the time of writing) is ~8 gigabytes zipped. When you unzip it, that's another 17 gigabytes. Then you'll need the command line tool, which is yet another 1.5 gigabytes.

Here's an overview of the steps to install Xcode

Install Xcode Mac Catalina Free

1. Download Xcode
2. Install the command line tool
3. Open the new version
4. Delete files

Note that I have listed some Terminal commands in the steps below. These commands can be typed into your present working directory. This means that you don't need to navigate to any particular folder.

If you really want to, you can first type cd before typing the commands in the below steps. This will return you back to the home folder.

Mac Catalina Install Xcode Command Line Tools

Step #1: Download Xcode

There are two ways to do this. For the latest version and a theoretically 'easy' installation, you can use the App Store. I don't recommend this option.

I prefer to use the developer site. This comes with the bonus option of being able to download any version you'd like.

Option #1: Download via the App Store for the latest version (not my preferred option)

In theory, this should be a seamless and pain-free process. But if the installation fails for any reason on the last step, it is very hard to troubleshoot.

There are a few reasons for failure, and no easy way to know which is the underlying cause. If you do encounter a failure, you will need to re-download the entire file again each time you try to fix the failure. As the latest version is 8 gigabytes, I didn't much enjoy this approach.

But if you're feeling brave, here are the steps:

• Open the App Store on your mac
• Sign in
• Search for Xcode
• Click install or update

Option 2: Download via the Developer site for a specific version (my preferred option)

1. Head to the 'more' section of the Apple developer website
2. Sign in with your iTunes account id
3. Type in the version that you'd like, and download the Xcode_x_x_x.xip file. Keep in mind that Xcode 11.4.1 is 8 gigabytes, so this will take awhile depending on your internet connection.
4. Once the file is downloaded, click on .xip to extract it. Your laptop will extract it to the same folder you downloaded it to. This extraction process is automatic. You don't need to do anything more after you click on the .xip file. This step will take a few minutes.
5. [Optional] Once extracted, rename the application to “Xcode11.x.x” if you are using multiple versions.
6. Drag application to the Applications folder
7. [Optional] Set the new Xcode version as the default. Open Terminal and type sudo xcode-select -switch /Applications/Xcodex.x.x.app . Replace x.x.x with the version number. For example: Xcode11.4.1.app. You will need to enter in your computer admin password. I'm pretty sure this will update the default Xcode version for all users on your computer, so best to check with other users first

Step #2: Install the command line tool (CLT)

If you have multiple users on your computer, you will need to update the CLT for each user.

Download .dmg

To update the CLT, go to app developer website and download the command line tool .dmg.

If you have never installed Xcode before, you may be able to update with your Terminal by typing in xcode-select --install instead of visiting the developer website.

But if you have an existing version of Xcode installed on your machine, you'll probably see this error:

This means you'll need to go to the developer website instead.

Installing the CLT

When the .dmg has finished downloaded, double click the file to open it. This will open a little window that looks like this:

Double click the box and follow the prompts to install the CLT. It will take a few minutes to complete.

It may ask you at the end of the installation whether you want to move this to the trash bin. When it does this, it's talking about moving the .dmg file to the trash bin. Since you should no longer need this file. I always say yes to this.

Step #3: Open Xcode

Open the Applications folder and open the new version of Xcode. If you renamed Xcode, make sure you open the correct application

Xcode may prompt you to install additional components. Click install. This will take a few minutes.

While it's installing, check that your default Xcode version is the one you just downloaded:

• Open Terminal
• Type brew config
• You should see “CLT” and “Xcode” versions, as well as everything else. This should reflect the version that you have just downloaded. In my case, I downloaded Xcode 11.4.1.

Once the components are installed, Xcode will launch. You should be able to pick up your old projects and continue where you left off seamlessly*.

*Note that if you use any proxy tools, such as Charles, you will need to re-install those certificates in your simulator again.

If you encounter any errors while trying to build or run a project, check which device you are trying to launch. The new version may not remember the device you were using before. If so, click on the device and choose 'Add additional simulators' from the drop down menu to add the device you want.

Step #4. Delete the files

If you don't need the older versions of Xcode on your computer, you can uninstall them and get some hard drive space back.

You can also delete the .xip file of the version you just downloaded, as well as the CLT.dmg file.

That's everything. I hope this has helped you successfully install Xcode. Have fun with it!